Roco MBB-BO-105 Luftrettung in 1:87 Abziehbilder dafür

Antworten
Michael Peukert
Beiträge: 5
Registriert: Do 11. Jan 2018, 10:43
Wohnort: 23701 Eutin

Roco MBB-BO-105 Luftrettung in 1:87 Abziehbilder dafür

Beitrag von Michael Peukert »

Guten Abend,
ich habe bei Ebay einen Bausatz von Roco, BO-105, Artikelnummer HO-2201, Luftrettung, gekauft. Maßstab ist 1:87. Das Modell ist sehr alt, aber komplett, was die Bauteile angeht. Das Einzige was fehlt sind die Abziehbilder. Roco habe ich angeschrieben, mir wurde mitgeteilt, dass die Firma solche Abziehbilder nicht mehr zur Verfügung hat. Roco hat mir jedoch mitgeteilt, dass es Anbieter geben soll, die Abziehbilder, gemäß Wunsch, herstellen. Weiß jemand, wer solch ein Anbieter ist? Oder hat eventuell jemand solch einen Abziehbildersatz über, zur Verfügung, oder kennt jemanden, der so etwas hat und verkaufen möchte? Für Rückantworten bereits vielen Dank im Voraus.
MfG
Michael Peukert
Benutzeravatar
Jens O. Mehner
Beiträge: 3511
Registriert: Fr 2. Mär 2012, 11:53
Wohnort: Hamburg
Kontaktdaten:

Re: Roco MBB-BO-105 Luftrettung in 1:87 Abziehbilder dafür

Beitrag von Jens O. Mehner »

Moin Michael.

Peddinghaus hat zwei Bögen, einmal Björn Steiger, einmal DRF, die sind aktuell auch erhältlich. MBSK hatte ebenfalls mal passende Decals, aber die gibt es wohl nur noch aus zweiter Hand. Ich habe noch einen Bogen der MBSK-Decals (IIRC, Björn Steiger), aber bis ich dazu komme, sie zu suchen, wird es Pfingsten - wenn es also schnell gehen soll, dann schau mal bei Peddinghaus nach.

Gruß

Jens O.
Neu bei SMT Plus: BW/EDW/NATO/WP- und US-Kanister in vielen Ausführungen, neue cal. 50 und vieles mehr.

Information not shared is information lost.

1/87er, die feinmotorisch flinke Elite des Modellbaus.
Ian Simpson
Beiträge: 676
Registriert: Mo 5. Mär 2012, 20:59
Wohnort: UK

Re: Roco MBB-BO-105 Luftrettung in 1:87 Abziehbilder dafür

Beitrag von Ian Simpson »

Hi Michael
DF Helo stuff make some decals for BO105 in 1/87 but not sure if this is what you are looking for.
http://www.df-helostuff.de/Decals/
Michael Peukert
Beiträge: 5
Registriert: Do 11. Jan 2018, 10:43
Wohnort: 23701 Eutin

Re: Roco MBB-BO-105 Luftrettung in 1:87 Abziehbilder dafür

Beitrag von Michael Peukert »

Hi Ian,
thanks again, for your fast answer. I have checked your advice, but could not find the right item, in the offers of helostuff. Nevertheless, Jens Mehner gave a good advice to me, in this case Peddinghaus. This company factually offers the right item, identical to the decals of Roco, for this, let's say ancient kit. I have ordered one. Perhaps you remember my questions, concerning CH-53 helicopter, also manufactured by roco respectively herpa. You gave the best advices to me, including photographs. But I did not start to do this work yet, because my experience, doing work like this, is absolutely not enough. I will have to absolve much work, before I am able to do respectively copy your work.
Best regards
Michael
Ian Simpson
Beiträge: 676
Registriert: Mo 5. Mär 2012, 20:59
Wohnort: UK

Re: Roco MBB-BO-105 Luftrettung in 1:87 Abziehbilder dafür

Beitrag von Ian Simpson »

Hi Michael
I had not made an interior of a helicopter before I tried it on the CH53. I made plenty of mistakes but you just fix or repair what you do and hide the rest with paint so do not be concerned with how much experience you have as the best way to learn is to just keep trying and looking for any help or tips in books or the internet - that is all I do.
Ian
Antworten